• Reduces non-living buildup inside plumbing to ensure easy spa maintenance and reduce future problems
  • Highly concentrated blend of enzymes and powerful surfactants that cleans where you can’t!
  • Works great on jetted tubs


Spas/Hot Tubs:
  1. Remove cartridge filter elements (it is recommended to clean spa cartridges every time the spa is drained).
  2. With spa water temperature at 95°F or higher and circulation running, add entire contents of bottle to spa water.
  3. Run jets for a minimum of 5 minutes.
    Note: If foaming becomes excessive, turn jets off. Some foaming is expected during the purge process.
  4. Maintain water temperature at 95°F and allow spa to circulate overnight with jets off.
  5. Drain and rinse/clean out the surfaces of the spa. Refill the spa water and reinstall the filter elements.
  6. Proceed with normal spa maintenance.
For Jetted Tubs:
  1. Fill tub with hot water 1" above the jets.
  2. Add 1/2 bottle of OxiClean Spa Pipe Clean.
  3. Turn jets on for 5 minutes (some foaming will occur).
  4. Turn jets off and let sit for at least 5 hours.
  5. Turn jets on to flush the system.
  6. Drain tub & clean surface as needed.

  Printable version